Standard Industrial Press Brakes
-
Standard Industrial offers single cylinder, hydra-mechanical press brakes that give full tonnage throughout the stroke and most importantly full tonnage the length of the bed. The advantage of this system allows for off center loading, straight long bends, and less maintenance that with other hydraulic press brakes. Press Brakes are available from 100 to 1,000 tons with models available up to 24' in length. Up to 6 Axis CNC control is available on all models as well.
-
Standard's Hydraulic/Mechanical System
The hydraulic/mechanical system used by Standard is certainly a superior concept as evident by the number of manufacturers currently offering similar products. However, we have more experience in years and thousands of products designed and manufactured than any in the business. Our design experience is reflected in our size and type of bearings and shafts as well as our technical capability to design a bellcrank system that does not have excessive side loads. All forces are vertical above the ram centerline and are contained in the "box" structure that houses the drive system and ram guides.
-
Press Brake Ram
The ram of the press brake is guided by heavy duty slides as used in straight side presses. These slides are located both front and back of each end of the ram and are clearly superior to the small rear mounted guides found on other press brakes. All press brakes require guides to contain end movement of the ram. The Standard design is to provide a heavy duty, self aligning system at the rear center of the ram and located inside the press frame. This system requires no operator action when the ram level is adjusted.